Pig Poultry Farm Diesel Temperature Heater Temperature Control Machine

Product Description

Pig Poultry Farm Diesel Temperature Heater Temperature Control Machine
 


Product Show




Product Feature

★The fuel of this machine is diesel or kerosene.
★ 56L large integrated fuel tank, stainless steel combustion chamber, with cooling function, at least 12 hours of continuous operation; average fuel consumption of 3.5L / h, 340W motor, 5% energy saving than traditional heating, economical and practical.
★ gas atomization combustion, forced hot air type heating, rapid heating, good combustion effect, high work efficiency.
★The whole computer version of the dustproof design, waterproof grade IPX4 (no harmful effects caused by water splash in any direction); the board is fully moisture-proof design; long life rotary vane pump, long service life.
★Automatic electronic ignition, with flameout protection and overheat protection device, automatic shutdown due to overheating and abnormal conditions, safe and secure use.
★The outer layer anti-scald steel tube design, with handle and caster design, fine workmanship, intimate design considering safety, operation performance and economic benefits, easy to move, can also effectively block and prevent accidental burns.

Precautions

1. Do not store or use gasoline or other volatile flammable materials near the equipment.
2. The equipment is a direct-fired hot air blower, which uses the oxygen inside the house to assist combustion. It should ensure that the equipment works normally and the house is properly ventilated.
3. This heater cannot be used for heating in a home room or heating inside the vehicle.
4. Stop before refueling; unplug before repairing or moving the heater.
5. When the combustion chamber has fuel, it cannot be turned on. It cannot be turned on when there is volatile gas or fuel.
6. At least 0.4 square meters of seating area is required to obtain good ventilation and horizontally placed on the ground.
7. The safe distance to be maintained with flammable materials is 0.8 m on both sides, 1.5 m on top, and 3 m on hot air outlet. 2 m into the air inlet and note that the air inlet should not be covered by plastic cloth or canvas, thus affecting the air intake.
8. If the machine is stopped for a long time, it should be stored in a ventilated and dry place. The wet environment will cause the parts of the equipment to rust, resulting in the equipment not working properly. If it is not used for a long time, you can run the machine every two months to check whether the machine is damaged.
9. Fill the fuel tank with oil before storage to prevent rust inside the fuel tank. Discharge the oil in the fuel tank before use and replace it with new fuel.

Related Product






About us